Hallmark Industries 1/2HP, 115V/60HZ/1PH, 25 GPM Max, 150 ft MAX Head, S.S. SHELL 1.25”NPT outlet Specifications: 4 inch deep well submersible pump, 115V, 6.5 Amps. Fits a 5 or larger well casing. For 4” casing, use pump MA0460X-9, or MA0459X-14; All stainless-steel exterior construction to verify corrosion resistance; High efficiency motor has a built-in capacitor start and thermal protection for longer life and powerful start; Built in starer box. DOES NOT require an external starter box! This can be a 2-wire pump (2 wires+ ground) with 10′ prime gauge electric cord that meets UL standard; Another brands can have 30’ under sized wires (i.e. 18 GA for 1HP). They’re unnecessary and will harm the pump and whole house electrical systems. Submersible design creates quiet operation, with its unique design reduces its noise; 150 feet max total head = to open water. Refer to the ‘Pump Selection Guide’ (posted here) for the pressure tank applications; Include prime copper splice kit, thermal shrink kit, and water resistant tape kit for wiring; Please use Hallmark Industries’ copper 1.25”NPT check valve on your pressure tank; Free phone fortify for installation and troubleshooting; Warranty: 12 months limited manufacturer’s warranty, and lifetime technical fortify.
Pump, Deep Well Submersible Pump, 1/2HP, 110V 60HZ, 25 Gpm, Stainless Steel, for 5″ or bigger well, long life
2 wire pump with built in keep watch over box- DOES NOT require external keep watch over box; Industrial grade heavy duty, good for home usage; Built in thermal protection
Use 115V power to run the pump. 110V is a nominal voltage – covers from 100 V to 130V.
This pump has a max head of 150feet, which is to pump into an open tank, not a pressure tank. Please read the Pump Selection Guide provided under the product details.