Sump Pump Alarm & Protector – Monitors Your Pump Energy (HP) and Cuts Off When Dry Run, Overload or Stuck On Float Switch Detected – Works w/Out Water Level Sensors as in/Outdoor IP64 WiFi Plug

Owners spend millions of dollars annually addressing the consequences of pump failure. Failures in residential pumps such as sump pumps can result in costly equipment repair or replacement, as well as extensive building water damage because of flooding. One of the simplest ways to prevent pump failure is to constantly monitor your power consumption.

PumpFuse is a power monitor and pump protection device that works with all types of sump pumps and utility pumps, without the need for water level sensors.

How does it work
PumpFuse monitors small variations in your pump’s power usage and notifies you when it goes over or under the preset thresholds. Issues such as a faulty drift switch can lead to your pump running constantly and the pump’s built-in thermal protector can make it cycle on and off repeatedly. PumpFuse adds to your existing setup and can therefore prevent the on/off thermal cycling, alerting you about the want to perform preventative maintenance such as replacing a drift switch or pump cleaning to address scale or inlet clogging with dirt.

Detect load loss
– Dry running
– Defective drift switch
– Pump air-locked

Detect overloads
– Clogged or damaged impeller
– Check valve stuck, closed or improperly installed
– Discharge tube blocked
– Defective bearings

The mobile application
The PumpFuse mobile app works like a true Wi-Fi sump pump monitor, detecting failures by measuring the power the pump uses and sending malfunction alerts.

You also get extra dry pump protection with the remote reset feature.

LESS WORRY & MORE FUN – Monitor your pump from anywhere via Wi-Fi smartphone app – no want to rush to the basement to check on it
SAVE ON ELECTRIC BILL – Why Is Your Sump Pump Without end Running? – Get the WiFi sump pump alarm and prevent the pump burnout when the drift switch is stuck in “On” position or pump is obstructed
KEEP YOUR BASEMENT DRY – Get push notification alerts if there is a power outage or pump failure
DETECT & PREVENT COSTLY PUMP DAMAGE – The pump protector extends your sump pump life by sensing odd load on the pump motor and stopping the pump before an expensive breakdown happens
WIDE RANGE OF APPLICATIONS – It works great with any 1/6HP to 1HP 125VAC sump pumps, submersible pumps, sewage/effluent pumps, utility pumps, water well pumps etc
SECURE, RELIABLE & FAST – the device works on local network and on account of it is fast and reliable. No want to share private information with cloud services. Whilst remote power monitoring is limited to your home network you’ll still receive push notifications and see pump current status and usage history regardless of the network your smart phone is connected to although you are away from home
RELAX, NO SETUP REQUIRED – It is simple to install without requiring any external water level sensors. The PumpFuse device auto-calibrates on the first run