Zoeller 137-0050, Model G137, Series 130, Effluent & Sump Pump, 1/2 HP, 460 Volts, 3 Phase, Manual, Cast Iron, 1-1/2 Inch Discharge, 15 Ft. Cord

Zoeller “Flow-Mate” Effluent Pump

This submersible pump is designed to be used in residential or light commercial dewatering applications and can be utilized to transfer groundwater or effluent. These durable cast iron effluent pumps are used for septic tank, low pressure pipe (LPP) and enhanced glide STEP systems. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to verify quality and reliability for years of trouble-free performance.

Features

• On point: 10″ (25.4 cm)
• Off point: 2-3/4″ (7 cm)
• Simplex and duplex package systems available
• Variable level keep watch over systems to be had, designed for heavy-duty effluent applications
• Pumps should be operated in upright position
• For abnormal conditions a reserve safety factor is engineered into the design of every Zoeller pump

Control Panel Options

Below are the keep watch over panels that can be utilized with this effluent pump:

• 10-1074
• 10-1102

Note: Image is illustrative and would possibly not reflect details of actual product.

Durable, cast iron construction – switch case motor and pump housing, base and impeller. Carbon and ceramic shaft seal
All cast iron ASTM class 25, 2500# tensile strength. Stainless steel screws, bolts, guard, maintain, arm and seal assembly
Corrosion-resistant, powder coated epoxy finish . Maximum temperature for effluent or dewatering: 130°F (54°C) (extra duty: 140°F / 60°C)
No sheet metal parts to rust or corrode. Passes 5/8″ (16 mm) spherical solids
Upper and lower sleeve bearings running in bath of oil. No screens to clog