Zoeller 140-0005, Model BN140, Flow-Mate 140 Series, Sump Pump W/Piggyback Switch, 1 HP, 115 Volts, 1 Phase, 86 GPM, 1-1/2 NPT Discharge, 20 ft Cord, Automatic

Zoeller BN140 Effluent Pump

This submersible sump pump is designed to be used in residential or light commercial dewatering applications and can be utilized to transfer groundwater or effluent in addition to being ideal to be used in septic systems, low pressure pipe (LPP), and enhanced Waft STEP system applications.. It features a powder coated epoxy finish to prevent corrosion and is designed to offer great heat dissipation from the motor, ensuring a long service life. As with each and every Zoeller pump, each and every one is 100% pressure-tested, submerged and run to make sure quality and reliability for years of trouble-free performance.

Features

• Includes a variable level go with the flow switch and 1-1/2″ x 2″ PVC adapter fitting
• 1-1/2″ NPT vertical discharge
• Passes 1/2″ spherical solids
• Operates at 130° F in effluent or dewatering applications
• 20 ft UL listed, neoprene cord with molded plug cap and ground wire

Specifications:

• Phase: 1
• Frequency: 60 Hz
• Speed: 3450 rpm
• Seal: Single
• Motor Type: Permanent split capacitor
• Insulation: Class B
• Current: 12 Amps
• Discharge Size: 1-1/2″ NPT
• Solid Handling: 2″ spherical solids
• Cord Length: 20 ft
• Shut-off Head: 50 ft
• Maximum Waft: 86 gpm
• Maximum Temperature: 130°F
• Cooling: Oil filled
• Motor Protection: Auto reset thermal overload
• Upper Bearing: Sleeve bearing
• Lower Bearing: Ball bearing
• Mechanical Seals: Carbon and ceramic
• Impeller Type: Non-clogging vortex
• Impeller Material: Engineered thermoplastic
• Hardware: Stainless steel
• Motor Shaft: JIS S45C steel
• Gasket: Neoprene
• Notes: Single piggyback switch included
• Warranty: 1 year

Corrosion-resistant, powder coated epoxy finish
Durable cast iron cap, motor housing, pump housing, and base
Non-clogging, engineered thermoplastic vortex impeller design
Oil filled and hermetically sealed, automatic reset thermal overload protection
Upper sleeve and lower ball bearing running in bath of oil