Although you will never need a better jetter hose than the residential series, I also offer a “Commercial” series Clog Blaster jetter hose for those of you who are plumbers or who will be using the Clog Blaster on a daily basis. It has all the features of the Residential Clog Blaster jetter hose, but with a heavier duty hose covering and a super slick surface for sliding long distances through drain pipe. This is the jetter hose I use in my service!
It has a 1/4″ interior diameter hose, specially designed for home septic drain line jetting. It has a working pressure of up to 4,000 psi, with a bursting pressure of 11,000 psi. You will see an option box that asks you to select your pressure washer’s output volume in gallons per minute (GPM). In all cases the choices will be either “From 2.0 to 2.9 GPM” or “From 3.0 to 4.0 GPM”. Just click on the GPM that corresponds with the GPM of the pressure washer you will actually be using with the Clog Blaster jetting
hose. (This will tell me what jetter nozzle to include in your order).
(Please note that this hose is only to be used for pressure washers with a maximum output pressure of 3,500 psi to provide for an ample safety margin).
Both ends of the hose are finished with 1/4″ male, NPT threaded fittings. One hose end is threaded into a stainless steel laser jetting nozzle; which comes in two sizes based upon the given power washer output in Gals per minute (GPM). The other end is threaded into the standard power washer M22 coupler.